Rollout Schedule
QA-Systems: August 18, 2014
Client-Systems: September 9, 2014
- bug fix
- improvement
- new feature
Improvements and changes
General
| Ticket | Area | Summary | Description |
---|---|---|---|---|
Partner | Geschäftspartner Default Format CH VAT Number | There was a bug that the tax number format was resetted to MWST after a change of the partner. And if e.g. a correct UID number was entered Scope then validated that this is wrong because it expects the format of the MWST number. This has been corrected. | ||
Core | Preview of E-Mail signature | It is now possible to get a preview of the maintained email signature in application Email Signatures. | ||
Search | Global search finds no applications | Global search was enhanced to find applications where the name of the application contains more than one word, i.e. 'AWB Order'. | ||
Core | Clean up parameter email.signature | The Email Signature can now be maintained in a new separate application based on Branch and/or User. The new application is available for system-administrators. | ||
Exchange rates | Umrechnungskurse Report errors and show successful import | When importing exchange rates via CSV, Scope now displays how many rates were successfully imported. Additionally the error reporting was enhanced if a file cannot be imported. | ||
Finance, Partner | Geschäftspartner Partner maintenance: Debtor Profile - Default Currency to local | When creating a new debtor or creditor role in module partners, the system will default the currency to the local currency of the corresponding branch. | ||
Core | Merging of PDFs in document tab | It is now possible to consolidated different PDF documents in the document tab to into one PDF document only. Just select the required documents by using the mouse and the Ctrl Key and us the action "Merge selected documents...." from the ActionLink list below the document list. After that, a popup is shown where the single documents can be sorted and merged to one document in this sort order. | ||
Core | Remember user's password upon login | Scope 6.4 now offers the possibility to remember the password. If this option is used, starting Scope will automatically log the user in. To remove this setting, go to 'Configure' -> Settings and remove the checkbox. | ||
Core | When saving a file from the Documents tab in Scope, the file should get the original creation time on the local filesystem | When saving a file from Scope to another location, the local file will get the original timestamp from when the document has been created in Scope. | ||
Core | Restructure email functionality | The email tab as known in other functions and entries is now also available in the invoices opened in invoice overview function and on partners. | ||
Core | Email templates per user | Sending emails from Scope is now even more easy:
| ||
Core, Partner | Contact information - Add Clipboard function | To extended context menu on address fields such as shipper and consignee, an additional action has been added. This action is labeled "Copy to clipboard" (shortkey CTRL-ALT-c) and this action will copy the address and contact details of the general tab of the partner to the system clipboard, available for pasting (CTRL-V). | ||
Core | Display a shipment count behind the folder name | Behind the folders that can be created on your Scope Desktop, there is now a counter displaying how many files are located in that folder. | ||
Core | Provide access to selected properties of a bean in Text fields | It is now possible to add references / addresses in the remarks field of simple shipments by pressing ctrl-space. This will display the available option which can be used. | ||
Core | Drag/Drop function to drag a Scope document to an external application like Outlook email | Scope now supports the option to drag documents from the Documents Tab to another application or desktop. | ||
Core | Export Userlist: Add creation timestamp | When exporting the list of users, a new column was added to display when a user was created in the system. | ||
Core | Assign notes to one or more "applications" or "roles" | When creating a new note in partner maintenance you can select the context, where the note should pop up automatically. The following contexts are available:
You can select one or more contexts. If no context is selected, then the note is available for everything. | ||
Core | External attachments in email appliance | It is now also possible to attach external attachments to an email in manage attachments dialog of email appliance. | ||
UI | Support Drag & Drop in Documents Tab | The Drag & Drop functionality is available in tab documents to download and upload the corresponding file. |
Airfreight
| Ticket | Area | Summary | Description |
---|---|---|---|---|
Export | Export Master: Consolidation Changed Dialog Improvements | The dialogue "Houses Changed" in a Air Export mastershipment is only shown now when opening a Master that is in Consolidation Status "Closed". Furthermore, it checks for Customs Status and Security Status can be omitted. | ||
Forwarding | Air Export Quotations for multiple pickup addresses is missing | In the Quotations the information icon | ||
Air, Export | AIR EXPORT Validate Volume in AWB shipments | Additional Warnings have been created to prevent FWB message to be send with an incorrect (too large) volume formating. | ||
Forwarding, Import | Scope-internal Pre-Alerts should receive Actual Conveyance Details if available | If Pre-alerts are created from within the same organization then the pre-alert flight details will be synced to the flight details on the sending branch, including ATA and ATD. | ||
Air, Export | Warning/block when creating AWB for not secure shipment. | On the AWB entry and the FWB sending an additional warning has been added to inform the user that the AWB is being created on a shipment which is still in a nonsecure state. | ||
Air, Export | Air Export Consol Flight Schedule Master - Remarks Column | In the consol flight schedule overview, any remarks entered in the template are visible in details section of the selected AWB. | ||
Air, Export | Air Export: Automatically set Export Terminal when converting from Booking | When a Shipment or a Master (+ House Shipment) is created from an Export Booking and the port of destination and the air carrier has been registered, Scope now try to determine the Export Terminal automatically. | ||
Forwarding | Simple Shipment Air: Round Chargeable Weight | Simple Shipment Air : Scope rounds the chargeable weights (0,5 steps). | ||
Air, Forwarding | Identify Packages | It is now possible to add Unique package identifiers to individual packages. This can be done in the packages editor (F3) on air shipments. The package identification registration allows for two types of numbers, being customer and forwarder. Please note the package identification MUST be unique for each packages. | ||
Air, Export, NL Customs | Air Export - House - customs order status displayed | In Air Export the display of the status of a "external registered export MRN" will be shown as finished in the HAWB details overview on a consolidation. | ||
Air, Forwarding | Exclude PAX flights from OAG lookup per default when DGR is CAO | OAG Flight schedule searching will now default the Cargo Only option as active when the shipment contains DGR lines with the setting CAO. | ||
Air, Export, Finance | AE - separate currency column in Netrate CSV Export | On netrate Export-Spread-Sheet, the currency code has now been separated from the amounts columns so that a calculation in Excel is now possible without problems. | ||
Air, Export, Printing | Booking no. on AIr Booking Confirmation print populated with USI instead of assigned booking number. | In Air Export, the available booking confirmation print in the booking entry has been updated to the Generic Standard form layout and the booking number will correctly printed. | ||
Air, Import | Coload Import shipment "connect to main carriage" in dropdown menu | The validation for the connection to the main carriage in coload-in shipments in airfreight import has been improved. When cancelling the connection to the main carriage the MAWB No will be removed from the field and the validation demands entering a new MAWB No. If this is entered and belongs to an existing master the dialogue comes up again to ask the user if he wants to connect this coload-in shipment to the main carriage. If this is accepted also the action to cancel the connection to the main carriage is active agein. | ||
Air, Export | Make House's Handling Units selectable in an Export Master's DTT Transport Order | It is now possible to select any packages for an Air Export Master's Deliver-to-Terminal Transport (DTT) Order from a Houseshipment wich is consolidated on the Master, except from the Masters main transport orders own handling units (BUPs). | ||
Air, Export | Air Export shipment master shipment entry: Finish - Send pre-alerts: naming and filter function for attachments | In the Finish-popup you have the pre-alert function to select all documents generated for the shipment and its houses (if shipment is a mastershipment). Now there is a filter function of the documents to filter by document name or shipment number. |
Seafreight
| Ticket | Area | Summary | Description |
---|---|---|---|---|
Export, Sea | B/L editor: Keyboard shortcut for common actions | B/L editor : keyboard shortcut for common actions available as follows: 1.) Added Button Shortcuts in B/L Editor (Goods Tab):
2.) Added Button Shortcuts in B/L Editor (Preview Tab):
| ||
Export, Sea | Sea Export Shipments Incorrect label "liner agent" | In house shipments the for the local carrier agent was not yet updated from liner agent in to booking agent. | ||
| Export, Sea | Portbase: warning or pop-up if no NCTS or customs-ref. available (sea export shipment) | A pop up shows "keine Verzollungsaufträge verfügbar" if no NCTS or customs-ref. available (sea export shipment) | |
Export, Sea | Sea Freight Pre-Alert RSIXML2 | Prealert EDI via extras:
| ||
Export, Sea | EDI Shipment: Enable Dakosy B/L Instructions for EDI House Shipments | EDI-Shipment:
| ||
Export, Sea | Inttra Container Comments in EDI | The INTTRA booking messages has been extended so it allows for container specific remarks to be transmitted, the remarks field in the carrier booking will be populated with the remarks entered in the container details on the goods tab. | ||
Export, Sea | Sea Export Super House: Missing Import Agent breaks Print Sub Manifest action | Sea Export Super House (FCL): Missing Import Agent broke Print Sub Manifest action. This has been fixed. | ||
Sea | Portbase Reference number registration. | The portbase homeview has been improved providing new columns for Customs reference (MRN) and shipment number and additionally the search field will include the searching for the container and / or customs reference number. | ||
Sea, UI | IMDG Information: Show only Emergency Contact Name | IMDG Information : only one field for emergency contact Instead of showing two fields (emergency contact name and emergency contact phone), only one field is shown for emergency contact (name) and allow defining all contact specific information via context menu / modal dialog on contact name. | ||
Sea | Dakosy/HDS - validation of TIN not necessary | Dakosy/HDS : TIN will not be validated anymore. | ||
Export, Sea | HDS Cancellation including cancellation and/or forwarding of MRNs (Zapp-Circular 32) | Dakosy - HDS Cancellation: Since 01.04.2014 for confirmed HDS of type AES, AEM and DUX aside from the cancellation of the HDS following two variations are possible (see Zapp circular 32) : 1. Cancellation of the HDS with cancellation of one or more MRNs of this HDS (each MRN to be cancelled can be selected by the user) 2. Cancellation of the HDS with redirection of one or more MRNs to a different customs office (must be one in Germany); only allowed, if the HDS has status RLS (released) In both cases the user is enabled to select relevant MRNs; in case 2. he also can assign a new customs office (numerical 8-character code; available via a codelist lookup). | ||
Sea | Portbase MID - MED should be possible from Masters | The Portbase MID/MED message can now also be generated on Masters, For MID it will create a message for all applicable customs orders created on the master For MED it will create a message for all applicable customs order created on the linked house shipments. | ||
Import, Sea | Copy Seafreight Import - Port of Discharge - Port of destination are not copied | The copy shipment function in seafreight imports will now also copy the port of discharge and the port of departure. | ||
Dakosy | Sammelcontainerbeantragung | Dakosy-Interface: It is possible to insert and send S-Numbers for SAC-HDS (additionally to B and Z-Numbers) .Validation according to Z- and B-Number | ||
Export, Sea | Sea Export and Import Goods Editor - New validation before automatic update of total pieces | Goods editor (sea import and export):
| ||
Partner, Printing, Sea | Partner-Maintenance: increase address field role "Import Agent" for printout on B/L (HBL/OBL) | The field "individual B/L-address" in partner role import agent sea freight tab has been increased so that the address can be registered easier. |
Forwarding
| Ticket | Area | Summary | Description |
---|---|---|---|---|
Air, Export | Air Export CPA : AWBs from other issuing agents can manually be used | Scope now evaluates whether the AWB number maintained in the pool matches the issuing agent. | ||
Webtracking | Webtracking - Booking - offer standard address as pick up address | Track & Trace - In bookings the pickup address has ben enhanced. Additionally to the in the partner defined standard pickup address also the standard address of the shipper is offered. | ||
Webtracking | Web tracking booking - buttons cut off when logo to big | Track & Trace - For profiles a logo size restriction has been implemented. The Logo may not exceed 280 px x 70 px. The size is validated on upload. | ||
Statistics | Own staisticlayout-group for webtracking | A separate statistic layout group for web tracking has been implemented. | ||
Webtracking | rename MRN to Customs-References | Track & Trace - In Bookings MRN has been renamed to Customs Reference. | ||
Warehouse | New parameter for UnloadingList.jrxml and UnloadingListSingle.jrxml | Storage location can now be printed on the Unloading List. | ||
Warehouse | On-Hand Sendung Zoll_Status falsch | An error was fixed where the status of the customs order is "open" altough all pieces are processed. | ||
Air, Export | Air Export Security (DE): Treat Regulated Agent Shippers as Unsecure | SPX by RA is now only valid on dutch Scope Systems if the partner is RegB/TP. In Germany being RegB/TP is not sufficient for SPX by RA. | ||
Air, Export | Air Waybill default issuing place should only contain the city | The AWB default issuing place in the signature from now on only contains the city from the partner profile of the shipper's agent address. | ||
Forwarding, Validation | Transportorder: checkbox for print shipment details | If a yellow validation is shown, checkbox for print shipments details can be deactivated again and is no longer overlapped by the validation. | ||
Ordertracking | Tracking Template Applicability Filters: Rename "Priority" to "Weight" | In the tracking order templates the column priority has been renamed to weight. | ||
Forwarding | Create Shipment number if no number has already been generated | In case no shipment number has been generated when first saving the shipment, Scope will now generate the shipment number on second save. | ||
Forwarding, Sea | Sea Import ShipmentsMID message not stored on shipment | Portbase MID notification created on a shipment will now remain visible on the shipment. | ||
Air, Export | Incorrect security reason after security incident | Security Status is now updated correctly after creating security breach and security measure. | ||
Forwarding, Master Data, Partner | Default Trucking Company for Transport Type "Delivery Order" | It is now possible to define a default trucker for deliveries. | ||
Forwarding | Simple Shipment: Quick filter | Simple Shipment home view now also has a Quick Criteria Maintenance filter. | ||
Ordertracking | Tracking Templates: Easier Way to determine the parent template a milestone or exception is defined in | It is now possible to see the parent order tracking template when hovering over locked milestones. | ||
Ordertracking | Milestone Templates: Filter Event Types by Group | When entering event types in order tracking templates, Scope filters the events by groups. | ||
Forwarding | Add Form Booking Confirmation to Simple Shipment | In the function Shipments a new form has been added allowing the print of a booking confirmation. This form can be used to confirm the transport details to a customer. The form allows the selection and printing of the job costing lines. This for is delivered in Scope generic layout, should an organisation customized layout be required, please contact your local Scope support team with a requested specification. | ||
Warehouse | Truck Load: Store Third Party Reference Number | When performing a Free Truck Load, Scope can now store the reference number on the packages so they can be found later on using the same reference. | ||
Ordertracking | Shipment Monitor: Filter for "Unhandled Exceptions" does not work | A bug was fixed in Shipment monitor which caused unhandled exceptions not to be found. | ||
Forwarding | Make Simple Shipment Pickup Delivery Time Interval Capture more robust | In the Simple Shipments Road appliance Pickup/ Delivery Window fields combining defined and undefined time on the same day was not allowed. This has been fixed. | ||
Warehouse | Clearance Instructions for Tour Customs Orders | In Tour-Editor now also customs clearance instructions are available to print. | ||
Warehouse | Truck Offload/Load: Parties should be editable | For non-finished truck offloads / loads, the addresses of a position are now editable. | ||
Forwarding, Searching | Simple shipment - homeview: search by customs reference number (MRN nummer) | In simple shipments it is possible now to search/filter by customs reference number. | ||
Statistics | Statistics: change translation for road carrier from "Fuhrunternehmen" to "Frachtführer" | In statistics, the "Frachtführer" for simple shipments road in now taken correctly. | ||
Forwarding, Warehouse | OnHand Shipments: Remove Transport Order Action Enablement Broken | In the previous version, the delete function for transport orders in on hand shipments was broken. This has been fixed in the new version. | ||
Forwarding | all documents linked to a quotation should be visible in linked shipments and bookings | All documents linked to a quotation, including the printed quotation itself will be visible in linked bookings and shipments. | ||
Forwarding | Simple shipments (air) entry: add carrier product code in shipment entry | The field "product code" has been added to the simple shipment air module to select the corresponding value of the carrier. | ||
Core, UI | Guard against non-persistent commercial invoice being replaced | Adding a house to a master no longer destroys commercial invoice data being enterd on house level. | ||
Core | Insert a Partner Address similar to text blocks in a text field | In simple shipment remarks filed now with ctrl+space, a list of auto complete entries is available. This entries (currently the shipment-number and involved partner addresses) can be inserted with an auto complete function. | ||
Core | Assign notes to one or more "applications" or "roles" | When creating a new note in partner maintenance you can select the context, where the note should pop up automatically. The following contexts are available:
You can select one or more contexts. If no context is selected, then the note is available for everything. |
Customs Germany
| Ticket | Area | Summary | Description |
---|---|---|---|---|
ATLAS | ATLAS/Extern: Fehler, wenn transportMode = ROAD | Beim Einlesen einer ATLAS Nachricht mittels ATLAS Filing konnten Fehler auftreten, wenn der Verkehrszweig - Strassenverkehr - übergeben wurde. | ||
ATLAS | ATLAS Zolllager: Komprimierter Bescheid Positionen | In der Artikelverwaltung wird je nach Einstellung die Warenbeschreibung des allgemeinen Artikelprofils mit der Warenbeschreibung des Artikelprofils kombiniert und im Antrag mit einem Zeilenumbruch dargestellt. | ||
ATLAS | ATLAS/Zolllager: Nebenläufigkeitsprobleme in der EcwPed II | Mit diesem Ticket wurde die Einarbeitung von Schnittstellendaten im Hintergrund abgesichert. | ||
ATLAS | ATLAS/Zolllager: Nebenläufigkeitsprobleme in der EcwPed | Mit diesem Ticket wurden folgende Punkte umgesetzt: es wird verhindert, dass a) mehrere Anwender gleichzeitig einen Vorgang bearbeiten und speichern können b) ab und an der Editor auch, wenn er nur zur Ansicht geöffnet wurde, trotzdem Dinge speichern kann c) neben den Anwendern auch Hintergrundprozesse etwas ändern können. | ||
ATLAS | ATLAS/Zolllager/EcwPed: Erfassung leerer Warenausgänge unterbinden | In der EcwPed war es möglich einen leeren Warenausgang zu erfassen. Eigtl. sollte immer mind. die Abgangsmenge erfasst werden müssen. | ||
ATLAS | Stammdaten ATLAS Teilnehmer: Validator für EORI und auslaufende EORI | Stammdaten ATLAS Teilnehmer: Im ATLAS Teilnehmer Profil wurde eine zusätzliche Validierung eingebaut, dass die aktuelle EORI und die auslaufende EORI nicht gleich sein dürfen. | ||
ATLAS | ATLAS/Zolllager: Fehler beim Kopieren "leerer Vorgänge", die aus einem Atlas-Filing entstanden sind | ATLAS/Zolllager: Es gab einen Fehler beim Kopieren "leerer Vorgänge", die aus einem Atlas-Filing entstanden waren. Die Programmaktion "Kopieren" ist nur noch aktiv, wenn der Vorgang dies auch erlaubt. | ||
ATLAS | ATLAS/Einfuhr/Statistik: "Neu erzeugen" funktioniert nicht für große Zeiträume | ATLAS/Einfuhr/Statistik: "Neu erzeugen" funktioniert jetzt auch für große Zeiträume. Es kommt nicht mehr zu einem Timeout. | ||
ATLAS | ATLAS Zolllager Bestand - Storno ECWINF auswerten | Wenn z,b, im NCTS Verfahren mit BE Anteil AT-ZL ein Storno nach Überlassung zum NCTS vom Teilnehmer angefordert wurde, übermittelt der Zoll eine weitere ECWINF mit kennzeichen STORNO = JA. | ||
ATLAS | ATLAS Statistik- Umrechnungskurs Fracht und Kosten B17a | ATLAS Statistik-Fracht: Wenn es keine Luftfrachtkosten gibt, dann werden die Lieferkosten Beförderung B17A in den Feldern zwb_fk_* exportiert. Umrechnungskurs: Es wird immer der Umrechnungskurs ohne Rundungen exportiert, der auch in der Scope Datenbank gespeichert ist. Typischerweise runden Excel/OpenOffice die Daten in einer Zelle auf 2 Nachkommastellen.Die Anzeige auf 5 Nachkommastellen ist dann möglich durch Formatierung der Spalte zwb_fk_kurs | ||
ATLAS | ATLAS/Zolllager: Fehler beim Speichern einer Zollnachricht, wenn der Warenausgang einer Zolllager-BE-Position leer ist | ATLAS - Zolllager BE Anteil: Ein Fehler trat auf, wenn in einem beliebigen Folgeverfahren eine Zolllager-Beendigungsanteil-Position manuell erfasst wurde, bei der im Reiter Warenausgang kein Feld gefüllt war. Dies wurde nun behoben. | ||
ATLAS | ATLAS AES: Warenbeschreibung wird überschrieben | ATLAS AES: Warenbeschreibung wird bei einem Positionswechsel überschrieben. Dies wurde behoben. | ||
ATLAS | ATLAS NCTS: Automatische E_UR wird ohne Sachbearbeiter gesendet | Wenn der Anwender in SumA eine ESV für einen NCTS Antrag sendet erscheint einen pop-up Fenster. | ||
ATLAS | ATLAS/Zolllager/EGZ-ZL: Die CSV-Datei eines komprimierten Ausdrucks soll die einzelnen Warenausgänge ausgeben | ATLAS/Zolllager/EGZ-ZL: In der CSV-Datei eines komprimierten Ausdrucks werden nun auch die einzelnen Warenausgänge ausgegeben. | ||
ATLAS | NCTS Bürgschaftsbetrag wird nicht automatisch neu berechnet wenn Warenwert geändert wird | Feld Bürgschaftsbetrag wird sofort neu berechnet, wenn Warenwert geändert wird. | ||
ATLAS | ATLAS Statistik - Einzelmandantenfähigkeit- nach Auswahl Mandant - Ergebnis Statistik leer | ATLAS Statistik - Einzelmandantenfähigkeit- Nach Auswahl eines Mandanten wurden die zuvor gefundenen Einträge in der Statistik für den Mandanten nicht mehr angezeigt. Dies wurde nun behoben. | ||
ATLAS | ATLAS/Zolllager: Layouts für Bestands- und Bewegungsliste | Die Bestands- und Bewegungsliste verfügen nun bei Ihren Funktionen wie die Einfuhr-Statistik auch über Layouts. | ||
ATLAS | ATLAS: Prüfsumme nur prüfen, wenn die MRN auch nur aus prüfbaren Zeichen besteht | Bei der Eingabe einer MRN als Zollreferenz trat ein Fehler auf, wenn die MRN nicht nur aus prüfbaren Zeichen bestand. | ||
ATLAS | ATLAS Zolllager Bestand - Bestand Mandanten (Empfänger) filtern | Bei eingeschalteter Einzelmandantenfähigkeit werden auch in der Bestandsübersicht Zolllager nur die Bestandspositionen des aktuellen Mandaten (Empfänger) angezeigt , für den man eingeloggt ist | ||
ATLAS | ATLS/Zolllager: Alle Filings einer EGZ-ZL anzeigen | In der Zolllagerübersicht, kann man sich das AtlasFiling anzeigen lassen, durch welches der Vorgang entstanden ist. In einer EGZ-ZL werden aber mehrere AtlasFiling eingearbeitet und es wurde daher wird nur dass Letzte angezeigt. Nun werden im Dilaogfenster ATLAS Filing alle eingearbeiteten Vorgänge angezeigt. | ||
ATLAS | ATLAS Zolllager - SCWDEC - Beschreibung Artikel auch im Feld Ursprungsland | ATLAS Zolllager - SCWDEC - Die Warenbeschreibung eines Artikels wurde auch im Feld Ursprungsland angezeigt. Dies wurde nun korrigiert. | ||
ATLAS | ATLAS/AVUV: SciRec kann nicht SciPed eingearbeitet werden | ATLAS/AVUV: Eine SciRec konnte nach erhalt einer CUSTAX nicht in die SciPed eingearbeitet werden. Dies wurde nun behoben. | ||
ATLAS, Core | Wechsel Branch - Einzelmandantenfähigkeit aktualisiert nicht die Ansicht für den Mandanten | Beim Wechsel der Branch mit eingeschalteter Einzelmandantenfähigkeit bei beiden Branches, wurde die Ansicht für den Mandanten in der Benutzeroberfläche (Zolllager) nicht aktualisiert. Dies wurde nun korrigiert. | ||
ATLAS | ATLAS AES - Adresse Anmelder bearbeiten überschreibt Ladeort aus der Vorlage (Verteter) | ATLAS AES - Adresse Anmelder bearbeiten überschreibt Ladeort aus der Vorlage (Verteter) mit der Adresse aus den Anmelder Partner Daten (Normalverfahren) | ||
ATLAS, Forwarding | ATLAS NCTS: Vorbelegung Beförderungsmittel Abgang/ Beförderungsmittel Grenze aus einem Shipment | Generiert man aus der Sendungserfassung einen NCTS-Antrag, so werden die Kennzeichen für die Beförderungsmittel am Abgang und an der Grenze nicht korrekt vorbelegt. | ||
ATLAS | ATLAS Einfuhrverfahren - Aufteilung Kostenart FRT, erzeugt zusätzliche Zeile wenn neu gestartet | ATLAS Einfuhrverfahren - Aufteilung Kostenart FRT, erzeugte zusätzliche Zeile wenn neu gestartet. | ||
ATLAS | ATLAS/Zolllager: Neuer EGZ-ZL-Vorgang zeigt nicht an, dass es sich um eine EGZ-ZL handelt | Wenn ein EGZ-ZL-Vorgang durch ein AtlasFiling angelegt wird, wird jetzt in der Übersicht angezeigt, dass es sich um eine EGZ-ZL handelt. | ||
ATLAS | ATLAS/Zolllager: Registriernummer und Nummer des BE-Anteils fehlen bei Erledigungen aus einer EDecDat | Folgende Fehler wurden mit dem Ticket behoben:
| ||
ATLAS | ATLAS/NCTS: NPE, wegen fehlendem BE-Anteil in der Position | Beim Öffnen einer E_DEC_DAT aus einem ATLAS Filing, kam es zu einem Fehler, wegen fehlender BE-AnteilAT-ZL in der Position. Dieser Fehler wurde nun korrigiert. | ||
ATLAS, Master Data | Article: NPE wenn in einer Nachricht keine Position selektiert ist | Beim Löschen von Position in einer VZL kam es zu einer Fehlermeldung. Dies wurde nun korrigiert. | ||
ATLAS | ATLAS Zolllager - BA, EGZ, EGZZL Nr 2 im identischen Abrechnungsmonat - Zoll Status prüfen bei Einarbeitung VZA/AZ | Beim Einarbeiten in eine SciPed, ScwPed, CusPed und EcwPed wird nun der Status des Vorgangs beachtet. Es wird also ein zweiter Vorgang im identischen Abrechnungsmonat angelegt, wenn ein bereits bestehender Vorgang für diesen Abrechnungszeitraum eventuell schon den Zoll Status abgeschlossen hat | ||
ATLAS | ATLAS/Artikel: Neue Artikelnummer verschwindet, wenn das Feld den Fokus bekommt | Bei der Eingabe einer neuen Artikelnummer im Feld Artikelnummer in einer SCWDEC, war die neue Artikelnummer nicht mehr sichtbar, wenn das Feld Artikelnummer den Fokus bekam. Dies wurde nun behoben. | ||
ATLAS | ATLAS/EGZ: Beim komprimierten Ausdruck wird die CSV-Datei nicht erzeugt. | ATLAS/EGZ: Beim komprimierten Ausdruck wurde die CSV-Datei nicht erzeugt. Dies wurde nun behoben. | ||
ATLAS | ATLAS/Extern: Beim Verdichten der Schnittstellendaten, dürfen die BE-Anteile nicht verdichtet werden. | Wenn Filing-Daten nach AES oder NCTS übernommen werden, besteht die Möglichkeit, die Positionen nach Warentarifnummer und Ursprungsland zu verdichten. Dabei dürfen die BE-Anteile einer verdichteten Position aber nicht auf einen Artikel verdichtet werden, sondern hier muss jeder einzelne Artikel gezogen werden. | ||
ATLAS | ATLAS/EGZ: Fehler, wenn Antwort in einem Vorgang als gelesen markiert wird und der Vorgang gleichzeitig geöffnet ist | In ATLAS EGZ konnte ein Fehler auftreten, wenn ein Vorgang als gelesen markiert wurde und dieser gleichzeitig geöffnet war. Dies wurde korrigiert | ||
ATLAS | ATLAS/EGZ: Bewilligung aus der richtigen Rolle ziehen | Scope beachtet, neben den Bewilligungen aus dem Anmelder (unter Beachtung von "Anmelder ist Empfänger") auch den Vertreter bei A2/S2 Bewilligungen beim Anlegen eine EGZ. Es wurde zusätzlich eine Warnung eingebaut, wenn die Bewilligungsnummer nicht in den Stammdaten der jeweils notwendigen Rolle gefunden werden kann. | ||
ATLAS | ATLAS Einfuhr EGZ - Code des Empfängers nur in die Bezugsnummer schreiben bei Trennung | ATLAS Einfuhr EGZ - Der Code des Empfängers wird nur in die Bezugsnummer der EGZ geschrieben, wenn das Kennzeichen EGZ/BA nach Empfänger trennen in den Bewilligungsstammdaten gesetzt ist. | ||
ATLAS, Master Data | Artikel: Export | Mit der Programmaktion "Exportieren" können die Artikeldaten exportiert werden. Es werden immer alle Daten exportiert, die zu den aktuellen Suchparametern der Benutzeroberfläche passen; über die Schlüsselwortsuche können die Daten gezielt ausgewählt werden. | ||
ATLAS | ATLAS Zolllager Bestand- Suche nach Artikel /Charge (Problem Suche mit Bindestrich) | ATLAS Zolllager Bestand - Nach Charge und Variante kann jetzt auch mit Bindestrich gesucht werden. | ||
ATLAS | ATLAS: Vorlagen werden beim Wechsel der Appliance nicht neu geladen | Vorlage-Benutzeroberfläche wurde bei eingeschalteter Mandantenfähigkeit nicht aktualiert, es wurde eine Vorgänger Vorlage aus einem anderen Zollverfahren angezeigt. | ||
ATLAS | ATLAS/Zolllager: Erweiterung der Bestandsmigration | ATLAS/Zolllager: Erweiterung der Bestandsmigration | ||
ATLAS | Caused by: java.sql.BatchUpdateException: Data truncation: Data too long for column 'tariffItemNumber' at row 1 | Das Artikel-Profil wurde nicht validiert, wenn ein Artikel per F8 aus einer Zollnachricht heraus gespeichert wurde. | ||
ATLAS | ATLAS Zollllager SCWREC- Datum der Anschreibung | Das Datum der Anschreibung wurde bei Vorgängen, die durch ein Filing erzeugt wurden, unabhängig von AZL und VZL gesetzt. Dies wurde nun korrigiert und das Datum der Anschreibung wird nur noch bei einer AZL gesetzt. | ||
ATLAS | ATLAS/Zolllager: Filings für eine EGZ-ZL beachten den Branch nicht | Wenn zu einem ATLAS Filing die passende EGZ-ZL gesucht wird, wird jetzt nicht nur der Empfänger beachtet, sondern auch die aktuelle Branch. | ||
ATLAS | ATLAS - Artikel aus den Artikelstammdaten - falsche Validierung Artikel hat sich geändert | Bei der Übernahme eines Artikel aus den Stammdaten wurde eine Warnvalidierung bzgl. einer Änderung des Artikels angezeigt. Dies wurde korrigiert. | ||
ATLAS | ATLAS/Zolllager: Eine einmal erzeugte EcwPed kann nicht mehr gelöscht werden | ATLAS/Zolllager: Eine einmal erzeugte EcwPed konnte nicht mehr über den Link Nachricht löschen gelöscht werden. Dies wurde nun behoben. | ||
ATLAS | ATLAS EGZ - ATLAS EGZ - Wiederholung Status Benutzeroberfläche z.B. 10.10 Erfasst | ATLAS EGZ - ATLAS EGZ - Die Anzeige des Status in der Benutzeroberfläche ATLAS EGZ wurde korrigiert. | ||
Partner | SCH: ScopeCP-115 - Kundenprofil in Scope um CIN erweitern | Das Feld CIN (Customer Identification Number) wurde in Scope kundenspezifisch implementiert. | ||
ATLAS | ATLAS: Gesperrte Vorgänge können nicht zur Ansicht geöffnet werden | ATLAS: Gesperrte Vorgänge können nicht zur Ansicht geöffnet werden. | ||
ATLAS | ATLAS SumA: Erledigung der Menge bei Verwahrerwechsel | Die erledigte Stückzahl in der SumA Warenposition wird jetzt auf die Gesamtstückzahl gesetzt wenn der Branch weder der Verfüger noch der Verwahrer ist. Die offene Stückzahl ist damit dann 0. | ||
ATLAS | ATLAS/AVUV: NPE, wenn Bestand nicht korrekt gefüllt ist. | Bei der Erfassung eines BE Anteils AV/UV in ATLAS Einfuhr trat ein Fehler auf, wenn der Bestand nicht korrekt gefüllt war. | ||
ATLAS | ATLAS/NCTS: Failed to start service KewillGuaranteeMessageListener | Es trat ein Fehler auf, beim Server-Start eines Systems, das keine Externe-Bürgschaftskontrolle hatte. Dies wurde nun behoben. | ||
ATLAS | ATLAS/Zolllager: Finale Erledigung aus NCTS bei erhalt einer ETufRel erzeugen | ATLAS/Zolllager: Wenn in einem NCTS Vorgang eine Zolllagerbestandsposition als BE Anteil aus dem eigenen Bestand angegeben wird, wird eine Erledigung im Zolllager zur Bestandsposition angelegt und sobald der NCTS Vorgang eine ETufRel erhält, wird der Status der Erledigung systemseitig auf Abgeschlossen= Final Erledigt gesetzt. | ||
ATLAS | ATLAS/Zolllager: Löschen von Erledigungen für CUSTOMER_SUPPORT | Mit der zugewiesenen Rolle Customer_Support oder Root können Erledigungen im Zolllagerbestand gelöscht werden. Vorraussetzung ist ein entsprechender Status der Erledigungen. | ||
ATLAS | ATLAS Zolllager - SCWREC Artikel-AHStat Maßeinheit wird nicht mehr aus dem EZT vorbelegt | ATLAS Zolllager - SCWREC Artikel-AHStat Maßeinheit wurde nicht mehr aus dem EZT vorbelegt. Dies wurde nun behoben. | ||
ATLAS | ATLAS EGZ-ZL(ECWPED)- Berücksichtigung der beantragten Begünstigung aus der SCWDEC | Bei der Anlage der EGZ-ZL (ECWPED) mit den Daten aus der Fremdschnittstelle, wird der Wert aus dem Feld Art der Begünstigung aus dem Beendigungsanteil (aus den Daten der ursprünglichen Anmeldung zur Überführung in das Zolllager) in die EGZ-ZL vorbelegt. | ||
ATLAS | ATLAS/Einfuhr: Automatische Bestätigung von vorzeitigen Anmeldungen | Scope bietet eine Funktion, die es erlaubt, eine CUSCON in ATLAS Einfuhr vorzubereiten und erst zu einem bestimmten Zeitpunkt automatisch zu verschicken und fehlerhafte CUSCONs wiederholt zu schicken. Dies dient der Vermeidung von Zeitverzögerungen bei der Bestätigung von vorzeitigen Anmeldung in ATLAS Einfuhr (Nachricht CUSCON), etwa bei Vorgängen bei denen man weder der Verfügungsberechtigte noch Verwahrer ist oder bei Gestellungen außerhalb der "normalen Arbeitszeiten", In Scope können im ATLAS-Deklarant entsprechende Einstellungen vorgenommen werden, die den automatischen Versand regeln. Um diese Funktion nutzen zu können, wird eine spezielle Berechtigung benötigt. | ||
ATLAS | ATLAS/Einfuhr: Statistik Modul | Neues Statistikmodul Einfuhrstatistik In der Scope Anwendung ATLAS Statistik ist nun die ATLAS Einfuhrstatistik "Einfuhr Kopfdatenliste" und " Einfuhr Positionsdatenliste" integriert. Es können Daten für bestimmte Niederlassungen in einem bestimmten Zeitraum selektiert werden (es stehen die Niederlassungen zur Verfügung, für die der angemeldete Anwender auch freigeschaltet wurde), die Felder eines Reports können über eine eingebaute Filterfunktion aus einem Feldkatalog ausgewählt, gespeichert und verwaltet werden. Über ein Layout kann festgelegt werden, welche Spalten des Feldkatalogs in welcher Reihenfolge im Report exportiert werden sollen. Die Statistik kann als Excel-Datei und CSV-Datei exportiert werden oder auch in der Benutzeroberfläche direkt per Mail an eine hinterlegte Mail Adresse versandt werden. In der "Einfuhr Kopfdatenliste" werden die Daten der Auswertung der Vorgänge in eine Zeile geschrieben.In der "Einfuhr Positionsdatenliste" werden die Daten der Auswertung der Vorgänge je Position in eine Zeile geschrieben. | ||
ATLAS | ATLAS Einfuhr - Möglichkeit für das Wert Feld Zollwert (oder felder aus denen sich der Zollwert ergibt) einen max. Wert als Begrenzung hinterlegen zu können fehlt | Es gibt in Scope nun die Möglichkeit für das Wert Feld Zollwert (oder Felder aus denen sich der Zollwert ergibt) einen max. Wert als Begrenzung in den Partner Stammdaten ATLAS Teilnehmer zu hinterlegen. Wenn der Wert bei einer Zollanmeldung überschritten wird, wird dem Anwender ein Pop Up angezeigt, in dem er auf die Überschreitung hingewiesen wird. | ||
ATLAS | Felxible generation of Excel Export function for "Aufschubdaten" | In dem Menüpunkt ATLAS Aufschubkontrolle wurden drei neue Kontextaktionen hinzugefügt. Layouts: Hier kann der Anwender mit der Entsprechende Berechtigung Individuelle Layouts für den Excel Ausgabedatei anlegen und Verwalten. Relevante Berechtigungen: -Statistik-Layout Applikation starten und Layouts (Niiederlassung) verwalten - Statistik-Layouts (Firma) verwalten - Statistik-Layouts (Organisation) verwalten.
Export: Hier kann der Anwender zunächst einen Layout selektieren und mit "Ok" einen entsprechende Excel Datei direkt Generieren für den selektierten Aufschub Daten.
Email: Hier kann der Anwender zunächst einen Layout selektieren und mit "Ok" einen entsprechende Excel Datei direkt Generieren für den selektierten Aufschub Daten. Der Excel Datei wird per eMail versendet und nicht Direkt aufgemacht. Die eMail Adresse wird mit der EMail Adresse der angemeldeten Anwenders gefüllt. Der Anwender kann die EMail Adresse Manual verändern.
|
Customs Switzerland
| Ticket | Area | Summary | Description |
---|---|---|---|---|
CH Customs | EZVTeilnehmerProfileView: Broken Form Layout | In der vorherigen Scope Version gab es einen Bug bei der Ansicht der EZV-Teilnehmer Rolle im Geschäftspartner. Dies wurde mit der neuen Version behoben. | ||
CH Customs | In der CH NCTS Transitabmeldung Disposition werden keine Ausfuhrvorgänge mehr zur Auswahl angeboten | In der Transitabmeldung wurden in der Disposition keine Deklarationen mehr in der Auswahl angezeigt und konnten daher auch nicht mehr ausgewählt werden. Dieser Fehler wurde behoben |
Customs Netherlands
| Ticket | Area | Summary | Description |
---|---|---|---|---|
ATLAS, NL Customs, Sea | MED Portbase Customs Document Type changed | Selecting an NCTS document will now use the new, by portbase, assigned codes 821(T1) / 822 (T2) in the MED procedure. | ||
NL Customs | Partners VAT check uses VAT number Accounting Tab | The AGS Vat check incorrectly used the VAT number from the Accounting tab, in case the VAT number in the NL Customs Partner role was empty. This will no longer happen, additionally the VAT number in NL Customs Partner is validated to start with NL | ||
NL Customs | SAGITTA EXPORT - Postal code Formating | The Address fields on the commercial tab was not formatted correctly in the Sagitta export message. The space between the number and the letters will be removed automatically | ||
NL Customs | NCTS - IE141 - sending validation | NCTS - Information on non-arrived movement message validation has been improved to aid the user in a correct answer to customs | ||
NL Customs | Validation on Information on non arrived transport | The Information on non-transport message did not incorporate a correct validation on the length of the information. | ||
NL Customs | VAT Check default UI change Comfort details | The new Comfort message for NL customs VAT request processing has been improved to deal with more combinations to ensure processing. | ||
NL Customs | Partners Display VAT check result text over 2 lines | The VAT response details as per the new comfort message has been extended over 2 lines to improve readability | ||
NL Customs | Sagitta Uitvoer - incorrect character in NAD segment | To prevent a technical error in NL customs messaging the addresses both in NL customs Partner role and declarations will be block the usage of an underscore "_" in the address | ||
NL Customs | AGS ADDCOR incorrect entrepot validation still active | When Creating a Correction message, incorrect validation on Entrepot details was active, this has been rectified | ||
NL Customs | AGS DMSINV status not be overwritten | The status of an AGS declaration set to Invalidated will no longer be updated by the receipt of out of sequence messages. | ||
NL Customs | Comfort Guarantee information - On screen updates | The new Comfort Guarantee request will update the details whilst the declarant partner is opened. | ||
Forwarding, NL Customs | new Scope event linked scp.customs.PENDING_PROCEDURE | A new event will be registered on a shipment when on a linked customs order one of the following message is received: | ||
NL Customs | Article Maintenance - Document codes AGS defaulting | The issue whereby, under certain conditions, document codes registered on a article was double defaulted has been corrected. | ||
NL Customs | AGS - Shipment number - printed on payment details | The AGS Payment details has been updated to printthe shipment/reference number | ||
NL Customs | AGS Validation on Supplemental Quantity | In AGS the supplemental Quantity is only allowed as whole number with out decimals, this was not yet validated in Scope, This validation is now active | ||
NL Customs | VWA manual Void option to be enabled | It is now also possible to set the manually voided status on VWA declarations which are in "Declaration send" status. | ||
NL Customs | PD manual Void option to be enabled | In order to keep declarations organized, it has been made possible to set declaration in a send state to "Manually Voided". | ||
NL Customs | AGS - Payer / Surety Partner versus Importer | The validation activated by NL Customs on 6 july 2014 has been implemented in Scope also. The Validation ensures that in the Importer and the Payer/Surety partner are not the same. It should be a different partner or empty in case it is the same partner | ||
NL Customs | AGS validation on number of packages to be removed | The validation on the number of packages has been removed from the AGS packages detail. | ||
NL Customs | AGS Import If Declaration type = Y then the acceptance date field should be enabled | The Acceptance date field for a declaration of the type "Y" is enabled and should be populated. A "Y" declaration is sent when a AGS declaration has been release under emergency procedure and the disruption has been cleared. | ||
NL Customs | VWA - VGE status should not be overwritten by receipt other CPD204 status | VWA declarations sometimes received they status updates in the wrong order overwriting the release status. This will be prevent in future declarations. | ||
NL Customs | AGS Invoer Increase standard grid size for containers | The standard grid size for the number of containers displayed in AGS declarations has been increased. | ||
NL Customs | Fwd: AGS Import Article is displayed twice | In AGS the articles registered on the declarant / branch partner where under certain conditions displayed twice in search, this has been corrected | ||
NL Customs | Fwd: AGS Import Validation Arrival Transport Mode incorrect | The mode of transport of arrival will now be validated as mandatory in AGS | ||
NL Customs | Arrival at Exit NLEC10 - print a Scan order | On receipt of an NLEC10 (cargonaut 328) message a print is available in the arrival at exit function with the MRN in barcode and shipment details to provide a link between the shipment and the to be scanned packages. | ||
Export, NL Customs | new Scope event linked scp.customs.Export-Inspection | In case an 328/NLEC10 - ECS inspection notification(Nl Customs) is received an Scope event will be created on the shipment where the MRN is linked to. | ||
NL Customs | Portbase Reference number registration. | The portbase homeview has been improved providing new columns for | ||
Forwarding, Sea | Sea Import Shipments MID message not stored on shipment | Portbase MID notification created on a shipment will now remain visible on the shipment. | ||
NL Customs | NL Customs Template Usage Procedure | In NL Custom entries the drop-down box for template selection has been replaced by a search field. the search field will search for the respective template by its name. | ||
NL Customs | VWA Improve Validation | To assist the user in doing a correct VWA declaration additional validations have been added for: | ||
Core | Article Browse - Yellow note - Include NL Customs Profile information | The Information pop-up which is shown during selection in NL Customs profiles will now include the main details of the NL customs profile. | ||
NL Customs, Printing | AGS - DMSREQ print - | When a DMSREQ is received on a AGS declaration, it is now possible to printed and read the comments of the customs officer. | ||
NL Customs | AGS - Payment exemption indication on Payment details | On the payment details of an AGS declaration, the total amount payable has been replaced by the text "Vrijgesteld van betaling" when the total declaration amount is less then 10 Euros. | ||
NL Customs | AGS Improve defaulting | The usage of AGS templates has been improved so it will correctly default details from the details setting, such as requested regulation and the setting for the DV1. | ||
NL Customs | IE055 Message needs form to be printed | In NCTS the receipt of an IE055 message will no allow printing of the specifics mentioned in the message. | ||
NL Customs | Sending AGS Declaration with 0.00 in value adjustment causes strange answers from AGS | The unclear error message in AGS declarations of negative customs value was caused by sending Value adjustment items such as freight when this equals 0.00. These adjustments will not be send when the are equal to 0.00. | ||
Forwarding, NL Customs | AGS - Custom Procedure to Portbase | For operations where there is no linked Sea freight import shipment it is no possible to create an PORTBASE MID notification by selecting an AGS declaration in the AGS HOMEVIEW. Al details will be selected from the AGS declaration. | ||
Forwarding, NL Customs | NL NCTS - Custom Procedure to Portbase | If the portbase module is active and setup, then any NCTS declaration can be selected for the follow-up procedure of the type MID or MED. | ||
NL Customs | Sagitta Uitvoer Representation warning incorrect | Under certain conditions, a validation warning about representation details in Sagitta Export was given incorrectly which has been corrected | ||
NL Customs | CLIENT VWA Nett weight VWA should be rounded to whole kilos with a minimum of 1 | To avoid technical errors weights in VWA declarations will be send rounded to whole kilos in the message | ||
NL Customs | Fwd: AGS Invoer Tax Base value - Value field validation | In AGS tax details the value field will be validated as fixed in EUR | ||
NL Customs, Printing | AGS Handle combined packaging and correct printing of number of packages. | Since NL Customs - AGS no longer supports BYPACK (OMIH) items, the registrations instructions from customs lead to incorrect numbers in box 6 (total pieces). To simplify the BYPACK procedure for the users an additional Check box has been added on item level, called BYPACK (EN) / OMIH (NL). | ||
NL Customs | NL Customs Nett weight defaulting | By default the nett weight in NL Customs entries is calculated automatically, but a new option has been added to the NL Customs declarant role to indicate whether this automation should be done or not. | ||
NL Customs | NL CUSTOMS Homeview Container search | In all NL Customs Homeviews, it is now possible to search a declaration on basis of the container number | ||
NL Customs | Partners Own entrepot default value should be false | When creating an NL Customs Goods location the own entrepot setting will no longer be defaulted as "true" | ||
NL Customs | NL-NCT Senter a reference number to search NCTS | in the NL NCTS entry the option to register an own reference to the declaration was missing, since it is not required in the message specification, however for organisations using NCTS as stand-alone option it missed a field to register a reference. A reference field has been added general tab. This new field is available as column in the homeview and both the quick and global search | ||
NL Customs | NL-NCTS For NCTS Arrivals Display the Goods location Details in the Consignee Column | In the homeview of NL NCTS the column Consignee will now display the entered goods location code. | ||
NL Customs | AGS - Homeview Quick Search | In the AGS homeview search the search option has been extended to allow searching for: | ||
NL Customs | Partners Add New Field "LRN ID" and use as this in NCTS / AGS for the LRN/Ref | The first half of the LRN number used in NCTS or AGS declarations was using the registered VAT number however to improve flexibility a new field has been added to the role declarant where the first part of the LRN number is registered. The new field has been populated with the existing VAT number. | ||
NL Customs | C-Sum InventoryThe comparison Report should consider all inventory of all warehouses | The comparison report now also considers Inventory located in multiple Scope warehouses | ||
NL Customs | AGS - DV1 section - Item Level Qualifier INV incorrect | In AGS - DV1 details grid, one of the options was labeled "INV/invoice" | ||
NL Customs | AGS Import Add filter criteria on requested procedure | In the homeview of AGS an additional dropdown box has been added to allow filtering on the requested procedure | ||
NL Customs | AGS Value Corrections with an AMOUNT 0.00 on item level should not be sent | AGS under certain ratio's value corrections for some items result in a transport value of 0,00 this will no longer be sent to customs as this leads to an error. | ||
ATLAS, CH Customs, Forwarding, NL Customs | Notification for Removal of CustomsOrder | The delete procedure of NL Customs procedures has been improved and the synchronisation between customs procedure (order) and linked shipments. | ||
Sea | Sagitta Export Customs Procedures to Port Community Messages | For stand-alone NL customs Operations it is now possible to send Portbase message from a Sagitta Export declaration. The shipment reference with will be used as booking number. If all details are available then the message will be send directly. |
Customs USA
| Ticket | Area | Summary | Description |
---|---|---|---|---|
Printing, US Customs | USAES Printed documents - various bags | Addresses and Terminal print correctly on printed documents |
Finance
| Ticket | Area | Summary | Description |
---|---|---|---|---|
Finance, Printing | Finance: incoming voucher - implement automated printing | If the printqueue is setup, the printout of the accounts payable is done automatically while finishing the voucher. | ||
Statistics | Statistics - Profit Column for Charge Type groups | In the statistics a additional column has been made available for the charge types. This column is the Profit column | ||
Finance, UI | Use alt+D/alt+P as action accelerator to print an accounts receivable | A new shortcut for printing receivable invoices has been added. For logged in with language English the shortcut is ALT+P, for logged in with language German the shortcut is ALT+D | ||
Finance | Improve search for order reference in voucher lucene search | The search in the function of accounts receivable will now also find invoices where a -(dash) as part of the order number is entered as search value. | ||
Finance, Master Data | Split allowed currencies on legal entity for debit / credit | The list of currencies available with in a organisation has been split over 2 separate lists. One for debtors and one for creditors. Validations will look at the corresponding currency is allowed for the type of cost being registered on a certain partner. | ||
Finance | Accounts Payable Add option to default the Accounts Payable Eco date with Invoice Date | It is now possible to have the incoming invoices booked on the invoice-date instead of the date of entry or the shipment date. Please contact support to have this option activated. | ||
Finance, Partner | Geschäftspartner Partner maintenance: Debtor Profile - Default Currency to local | When creating a new debtor or creditor role in module partners, the system will default the currency to the local currency of the corresponding branch. | ||
Forwarding | Volume Rounding Errors Dimensions | An error in volume rounding was fixed. | ||
Finance, Sea | Finance - Tariff maintenance: Remove Length validation for container type | In equipment the length for the container code is limited to 32 digits. In tariff maintenance the base for container type is limited to 32 digits as well now. | ||
Finance | Add option to print Proforma Invoice | For invoices that are not printed yet, a proforma-invoice can be generated. | ||
Finance | Accounts payable+receivable: Extract data to XLS-sheet - change columns to one invoice currency | In the Accounts payable+receivable - Extract data to XLS-sheet, various excessive currency code columns have been removed. Th file now only content on column "invoice currency". | ||
Finance | Finance - Export für Ausgangsbelege | In the sales invoice, now also a export (excel) function is available. | ||
Finance | Sammelbelege Typo "Rückverütung" | A typo was fixed in collective vouchers. | ||
Finance | Invoice email Subject defaulting | When creating an email on the email tab of invoice / purchase invoices the subject line of the email will be defaulted now by:
| ||
Finance | Define used exchange rate in partner profile | It is now possible to select the default exchange rate column on a debtor profile. Furthermore there is a lookup functionality on chargeline level to search for exchange rates and select the correct one. | ||
Finance, Searching, UI | Accounts Payable Charge Line Editor: for house shipments, add an action that links the charge line to the corresponding master | In a new charge line of incoming invoices (Accounts payable) a new action-link is available: change order to master shipment. This link will automatically pull the corresponding master shipment as order, even when you only entered the house-shipment as reference. | ||
Finance | Invoice: Option to group charge lines together for the invoice printout | Scope now supports grouping of charge-lines on an outgoing invoice. In the debtor role of a partner, a grouping can be defined. Automatic created invoices will use that definition for grouping. | ||
Finance | Overhaul tariffing for accruals/invoices, add option to manually choose tariff-sub-orders | In actual editor and in charge lines of outgoing invoice, a new area for "tariffing" has been added. In this area, the tariff-sub-order, tariff-customer and tariff-customer-tariff-to for calculation of costs or accruals can be stored. Normally, the jobcosting calculation sets the correct values here but in some cases, it might be possible that the user change something manually which is now possible. | ||
Finance, Order | Job Costing Status: "Closed" should not allow any changes in jobcosting | It is now no longer possible to change/add jobcosting entries in a shipment once the shipment has the status closed. All buttons will be inactive as well as the manual invoicing options. Even with internal invoices this is no longer possible; a validation error will appear to let the user know that he tries to add costs to an already closed shipment. | ||
Finance | Restore of deleted reserves in the reserve appliance | In the jobcosting tab, a deleted accrual can now be restored with the button next to the delete button. For this function, a special permission is required. If you need this permission, please contact your local Scope support. | ||
Master Data, UI | Display names of currencies when selecting a currency | In currency fields now during the search of a currency also the currency name is shown, not only the code. |
Permission Changes
Area | Permission | Description |
---|---|---|
ATLAS | CUSTOMS_DE_ATLAS_STATISTICS_AVUV_INVENTORY_TAB | Launch the ATLAS AVUV Bestandsliste statistic |
ATLAS | CUSTOMS_DE_ATLAS_STATISTICS_AVUV_TRANSACTIONS_TAB | Launch the ATLAS AVUV Bewegungsliste statistic |
Finance | FINANCE_CREDIT_LIMIT_OVERRIDE | Erlaubt das abschließen von Ausgangsbelegen trotz Überschreiten des Kreditlimits |
Forwarding | FORWARDING_BOOKING_APP | Launch the Booking appliance |
Reporting | Reporting: Generate CBS Report | To see the CBS report in the reporting appliance |
Sea Export | SEA_EXPORT_PREALERT_MANUAL | Trigger the sending of a Sea Export Pre-Alert XML manually |
Sales | Manage Salespeople | Verkäufer pflegen |
Sales | partner.MANAGE_SALES_PERSONS_ALLOCATION | Verkäuferzuordnungen pflegen |
Air Export | AIR_EXPORT_ULDS | Air Export: Capture ULD data for Shipments |
ATLAS | Send ATLAS Messages Delayed | ATLAS-Nachrichten verzögert senden |